This browser is outdated. Please switch to a different browser to be able to use our website to the full extent.

Linde VertiLight and Linde LED Stripes

Excellently Illuminated
VertiLight by Linde Material Handling

Seeing and being seen is fundamental not only to safety but also efficiency when working with industrial trucks. The right light at the right time in the right place is an essential prerequisite for this. However, many lighting systems for forklift trucks cannot serve this purpose. They illuminate the working area only at certain points and often leave the edges dark or cast reflections on the mast or load which dazzle the driver.

With the Linde VertiLight and Linde LED Stripes, Linde Material Handling offers two innovative lighting concepts which solve these problems. Both provide optimum illumination of the working area and enable safe, precise and efficient work even in the case of inadequate hall lighting.

VertiLight – Innovative Design Provides Optimum Illumination

In contrast to conventional headlights, the Linde VertiLight illuminates the working area over a large area thanks to its half-circular design with a wide light band and seven ideally arranged LEDs. The LEDs distribute the light uniformly from the floor to the upper edge of the shelf and improve visibility of the shelf, load and forks.

With counterbalance and reach trucks, the illumination angle can be individually adjusted via the holder to adapt the lighting to any application in the warehouse, hall or production area. Ideal for high rack use: With reach trucks, the diagonal arrangement of the two headlamps further increases the illumination range.

The special arrangement of the LEDs and the pleasant color of the VertiLight reduce glare and ensure greater safety in internal traffic. Oncoming vehicles and pedestrians are less dazzled and the driver himself is not irritated by reflective goods or truck interiors. Since the VertiLight is attached to the side of the mast, there is no distracting light reflection on the mast.

Video VertiLight by Linde
LED worklights in use
VertiLight in use on a truck
LED worklights in use on a truck
VertiLight in use at a truck
LED worklights in front of the truck
VertiLight in use in the front od the truck
Video VertiLight by Linde
LED worklights in use
LED worklights: Spot illumination
VertiLight in use on a truck
VertiLight: Even, large-area illumination
LED worklights in use on a truck
LED worklights: High reflection, high glare effect
VertiLight in use at a truck
VertiLight: Even illumination, low glare effect
LED worklights in front of the truck
LED worklights: Strong glare for employees
VertiLight in use in the front od the truck
VertiLight: Low glare for employees

Benefits of VertiLight at a Glance

  • Uniform illumination of the working area
  • Improved visibility of racks, load and forks
  • Low glare effect for the driver
  • Low glare for pedestrians and other vehicles
  • Long service life

LED Stripes: Optimized Illumination for Front and Rear

The Linde LED Stripes provide optimum safety conditions at the front and rear of the vehicle: The two-color light strips illuminate use white light to illuminate the truck's direction of travel. If the direction of travel changes, the light color automatically changes from white to red. Pedestrians and other vehicles can therefore identify the direction in which the truck is moving, even from far away – which further increases safety in warehouse traffic.

The LED Stripes are attached to the mast and rear of the vehicle and illuminate the immediate working area just as evenly and extensively as the VertiLight. This enables safe, precise and efficient work in any environment.

As with the VertiLight, Linde's innovative lighting concept minimizes glare for oncoming vehicles and pedestrians and allows the driver to work efficiently in the hall. Both lighting solutions have an impressive service life of up to 20,000 hours.

Video about the LED Stripes by Linde
LED worklights in use
LED Stripes in use
LED worklight in front of the truck
LED Stripes in front of the truck
Video about the LED Stripes by Linde
Video about the LED Stripes by Linde
LED worklights in use
LED worklights: Spot illumination
LED Stripes in use
LED Stripes: Even, large-area illumination
LED worklight in front of the truck
LED worklights: High glare effect
LED Stripes in front of the truck
LED Stripes: Low glare effect

Benefits of LED Stripes at a Glance

  • Uniform illumination of the working area
  • Improved visibility of racks, load and forks
  • Optimized illumination of the respective direction of travel
  • Color change between white (direction of travel) and red light (opposite direction)
  • Low glare effect for the driver
  • Low glare for pedestrians and other vehicles
  • More safety thanks to direction indicator
  • Long service life