This browser is outdated. Please switch to a different browser to be able to use our website to the full extent.
  • 0 - 1600 (kg)
  • 0 - 865 (mm)

Order Pickers N20 XL

Powerful picking solution

Simultaneous picking with two pallets at driver height

Thanks to its extra-long forks, the N20 XL from Linde Material Handling can transport two pallets on initial lift with a total weight of up to 2.0 t simultaneously. The mast construction allows the driver to load both pallets, (300 kg each) at a height of 750 mm, making it easy on the driver’s back. As the driver’s platform is positioned in front of the battery, the driver always has a good view of the warehouse environment whilst driving and can react early to dangerous situations. The entire operating platform is spring-loaded which reduces vibrations or shocks caused by uneven floors.

Characteristics

Safety

The N20 XL order picker has three braking systems that protect the driver and load: The electromagnetic service brake is coupled to the dead man’s switch and an emergency button. A hydraulically assisted braking system reduces the speed proportionally to the weight of the load, and the Linde brake control automatically applies when the drive control is released. Additional safety is provided by the flattened contours of the chassis and the rounded driver’s platform as well as the automatic lane centering of the Linde steering wheel. A steel bumper at the front of the truck reduces shocks and vibrations. A rubber coating can be added to the bumper as an option. When cornering, the truck reduces its speed in proportion to the angle of the steering wheel. As an option, LED front lights and the Linde BlueSpot™ also visually announce the order picker.

  • Three separate braking systems
  • Dead man’s switch and emergency button
  • Flattened contours
  • Automatic lane centering of the Linde steering wheel
  • Automatic speed reduction when cornering

Ergonomics

The wide driver’s platform, which is easily accessible from both sides, has a low entrance which enables the driver to get on and off easily. Two pallets can be loaded simultaneously at a height that is easy on the back, thus saving unnecessary movement. To further optimize efficiency, the mast control and optional pedestrian controls for moving the truck are located on both sides of the backrest. The driver’s cab has various options for the driver to adapt the truck to their requirements, including many storage areas. Both the intuitive Linde steering wheel and the backrest with fold-out seat are optionally height-adjustable. In addition, the operating platform is spring-loaded and reduces vibrations and shocks while driving.

  • Wide and low access points
  • Pedestrian controls on both sides of the backrest
  • Storage areas in the operating platform
  • Intuitive Linde steering wheel
  • Suspended operating platform

Handling

Powered by a 3-kW three-phase AC motor, the order picker can accelerate quickly to up to 12 km/h. Various wheel designs ensure truck and load stability on transport routes within the warehouse. Either lead-acid or optionally lithium-ion batteries provide the optimum power supply to meet the requirements of the fleet. With the intuitive Linde steering wheel, the driver controls all driving and mast functions effortlessly and with pin-point accuracy. For very short distances in the rack rows, the driver can comfortably use the pedestrian function controls on both sides of the truck, saving unnecessary boarding and alighting. An initial lift function facilitates transport over ramps and uneven surfaces.

  • 3-kW three-phase motor
  • Choice of wheels for stability
  • Lithium-ion battery (optional)
  • Effortless control with Linde steering wheel
  • Pedestrian function

Service

The order picker has a low servicing requirement and runs for around 1,000 hours before a service check is required. The three-phase AC technology requires no servicing and there is no need to readjust the brakes. During servicing, the service technician can easily remove the cover to the motor compartment and easily reach the central components. All wiring harnesses and cables are clearly arranged for quick servicing. The service technician can conveniently read the truck data on their mobile device via a CAN bus connection. A robust cast steel bumper protects the spring-loaded driver’s platform and thus reduces collision damage.

  • 1,000 operating hours before servicing
  • Adjustment-free brakes
  • Easy access to the engine compartment
  • Cable harnesses and cables clearly arranged
  • CAN-bus connection

Technical Data

Model Load capacity/Load Lift Travel speed, with/without load Turning radius Battery voltage/rated capacity (5h)
N20 XL 1.6 / 0.6 (t) 865 (mm) 10 / 12 km/h 2487 / 2557 (mm) 24 / 345/375 (V)/(Ah) o. kWh

Optional Equipment

The dashboard of the fleet management software Linde connect from Linde Material Handling

Fleet management

The Linde connect fleet management solution allows, among other things, for the usage of the complete truck fleet to be analyzed to optimize the service or utilization of the fleet.

The load backrest for the N20 XL order pickers from Linde Material Handling

Load backrest

The load backrest, which can be adapted to the height of the load, provides additional protection for the driver and load.

The BlueSpot™ from Linde Material Handling for the N20 XL order pickers

Linde BlueSpot™

The Linde BlueSpot™ route warning system increases safety in operation, as the LED spot makes trucks silently visible.

The N20 XL order pickers from Linde Material Handling with lithium-ion batteries

Lithium-ion battery

With Linde’s innovative lithium-ion technology, trucks can be recharged in a much shorter time and interim charging can be carried out during operation, increasing the availability of the trucks.

Pedestrian controls for the N20 XL order picker from Linde Material Handling

Pedestrian controls

There are push buttons on both sides of the truck which the driver can use to operate the order picker from outside the truck and walk alongside it at the same time.

Lateral battery change of the N20 XL order picker from Linde Material Handling

Lateral battery change

The lateral battery removal by means of roller bearings enables a quick change, especially for use in multi-shift applications.

Bumper of the N20 XL order pickers from Linde Material Handling

Bumper

The bumper reduces shocks in the event of a collision, thus protecting driver, truck, and infrastructure such as racks.

Fully suspended operating platform of the N20 XL order pickers from Linde Material Handling

Fully suspended operating platform

The bottom of the platform, the steering wheel and the backrest, including the fold-out seat, are protected against vibrations and shocks.

Get a Quote